Compared with 1000 series and 3000 series aluminum alloys, 5000 series aluminum alloys are also non-heat-treatable alloys, but with higher strength and excellent corrosion resistance.
Element | Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others（each） | Others（total） | Al |
Maximum Content | 0.25 | 0.40 | 0.10 | 0.10 | 2.2 - 2.8 | 0.10 | 0.15 | 0.15 - 0.35 | 0.05 | 0.15 | Reminder |
Element | Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others（each） | Others（total） | Al |
Maximum Content | 0.40 | 0.40 | 0.10 | 0.40 | 4.0 - 4.9 | 0.25 | 0.15 | 0.05 - 0.25 | 0.05 | 0.15 | Reminder |
Element | Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others（each） | Others（total） | Al |
Maximum Content | 0.40 | 0.50 | 0.10 | 0.2 - 0.7 | 3.5 - 4.5 | 0.25 | 0.15 | 0.05 - 0.25 | 0.05 | 0.15 | Reminder |
Element | Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others（each） | Others（total） | Al |
Maximum Content | 0.40 | 0.40 | 0.10 | 0.50 | 2.6 - 3.6 | 0.20 | 0.15 | 0.30 | 0.05 | 0.15 | Reminder |
Element | Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others（each） | Others（total） | Al |
Maximum Content | 0.25 | 0.40 | 0.10 | 0.50 | 2.4 - 3.0 | 0.25 | 0.20 | 0.05 - 0.20 | 0.05 | 0.15 | Reminder |
Alloy Type | Density (g/cm³) | Melting Point (℃) | Linear Expansion Coefficient (μm/m·K) | Thermal Conductivity (W/m·K) | Elastic Modulus (GPa) | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
5052 | 2.68 | 607 - 650 | 23.8 | 120 - 140 | 70 | 195 - 305 | 95 - 240 | 1 - 12 |
5083 | 2.65 | 570 - 640 | 23.5 | 110 - 140 | 72 | 270 - 365 | 125 - 280 | 2 - 10 |
5086 | 2.66 | 570 - 650 | 23.5 | 120 - 140 | 69 | 240 - 325 | 95 - 240 | 3 - 10 |
5754 | 2.66 | 600 - 640 | 21.5 | 120 - 150 | 70 | 190 - 270 | 80 - 220 | 4 - 12 |
5454 | 2.66 | 585 - 635 | 21.5 | 120 - 150 | 70 | 220 - 305 | 105 - 245 | 1 - 10 |
5000 series aluminum can be cast, extruded, and hot-rolled into aluminum rods, tubes, sheets, and strips. With strong processing performance, it can meet the requirements of various industries for different types of products with different 5000 series alloy performances.
5000 series aluminum sheet/strip has high strength, good corrosion resistance, and weldability. It is suitable for manufacturing in industries such as shipbuilding, automotive, electronics, construction, and aerospace.
5-series aluminum wire has excellent conductivity, good weldability, and corrosion resistance. It is widely used in the manufacturing of power transmission and distribution, communication lines, and electrical components.
5-series welding materials have good welding performance, high strength, good plasticity, and formability. They are suitable for production in industries such as aerospace, automotive manufacturing, railway transportation, metallurgical industry, and power.
These alloys are suitable for use in fields such as automotive parts, machinery manufacturing, and shipbuilding.
5000 series aluminum is a commonly used material in the aviation and aerospace industry, suitable for manufacturing aircraft body, wing, truss, wing and engine components, etc.
5000 series aluminum is also widely used in automotive production, which can manufacture car body, frame, door, wheel, engine components, transmission systems, and chassis, etc. It can improve the lightweight, fuel economy, and safety performance of vehicles.
5000 series aluminum can be used to manufacture building doors and windows, curtain walls, ceilings, wall panels, and other building decoration materials. It can also manufacture structural components such as bridges and railway transportation facilities, with good corrosion resistance and strength.
5000 series aluminum is also suitable for manufacturing ship hulls, decks, rivets, propellers, and other components, which can improve the corrosion resistance and strength of ships.
5000 series aluminum alloy is suitable for manufacturing various mechanical equipment components, such as hydraulic systems, pneumatic systems, electronic equipment, etc., with good strength and corrosion resistance.
5052 aluminum sheet is an aluminum alloy with high strength and good corrosion resistance, suitable for manufacturing oil tanks, oil pipes, ship structures, pressure vessels, condensers, capacitors, etc.
Suitable for manufacturing ship structures, oil tanks, pipelines, pressure vessels, vehicle panels, and other areas requiring high strength and corrosion resistance.
Suitable for manufacturing ship structures, oil tanks, pipelines, pressure vessels, vehicle panels, and other areas requiring high strength and corrosion resistance. Compared with 5083 aluminum sheet, 5086 aluminum sheet has slightly lower strength, but better corrosion resistance.
Suitable for manufacturing oil tanks, oil pipes, ship structures, pressure vessels, condensers, capacitors, etc.
Suitable for manufacturing oil tanks, oil pipes, ship structures, pressure vessels, condensers, capacitors, etc. Compared with 5754 aluminum sheet, 5454 aluminum sheet has slightly higher strength.
