Electronic Capacitor Housing

Specifications

Alloy: 3003,3104 (D.C material)

Temper: H14,H32A or H32B

Specifications: 0.29mm-0.45mm x 400mm x C

Coatings:Polymer composite

Melt Hydrogen : 0.12ml/100gAL

Features

  • High insulation, high heat dissipation, high voltage (10,000 volts; the molding punch is greater than 5000 volts
  • Deep drawing performance, anti-radio interference
  • Especially suitable for square capacitor housing.

Chemical Composition(%)

Alloy Si Fe Cu Mn Mg Cr Zn Ti
3E03 0.18-0.28 0.60-0.75 0.13-0.23 1.07-1.18 0.01 0.01 0.01 0.015-0.03
3104 0.6 0.8/th> 0.05-0.25- 0.8-1.4 0.8-1.3 0.25 0.1

Mechanical properties of substrate

Alloy Temper Thick.(mm) Tensile strength (Mpa) Yield strength (Mpa) Elongation (%) Earing rate(%) I.E.(MM)
3003 H14 0.29-0.45 165-175 ≥140 ≥8 ≤3 5.5
3104 H32A 0.29-0.45 180-190 ≥150 ≥8 ≤3 5.5
3104 H32B 0.29-0.45 165-185 ≥140 ≥8 ≤3 5.5

Through the German VDE certification

electronic capacitor housing-01
electronic capacitor housing-02
electronic capacitor housing-03
electronic capacitor housing-04

REQUEST A QUOTE

(please include grade/alloy, size, tolerance, specifications, edge, finish and other important material information)

(please include coil weight and sizes, max skid weight, boxing and any packaging or shipping requirements you have)